Glomex MK2+ Serie Manual Del Usuario página 61

8. Position the antenna onto the seal, inserting the
4 threaded bars through the holes, and pay
attention to direct the orientation symbol of the
antenna towards the bow.
Fig. 11
9. Install the fastening reinforcements onto the
threaded bars and screw in the M8 self-locking
nuts.
Fig. 12
10. Completely tighten.
S
WARNING
GLOMEX declines any liability for an incorrect
mounting of the radome on the boat.
11. Have the 10 m cable pass through the previ-
ously drilled hole (V9000, V9100, V9801).
12. Have the four 10 m cables pass through the
previously drilled hole (V9104, V9104SKEW,
V9804, V9804SKEW, R9804).
www.glomex.it
VENUS SATURN MARS RHINE
13. To connect the coaxial cable it is necessary to
remove the upper radome and to connect it to
the connector (1) found on the lower radome,
trying to give it a path that follows the curvature
of the radome.
Fig. 13
14. Should it be necessary to shorten the cable,
please refer to the instructions given in Fig. 14.
Fig. 14
59
GL00095