Sensor Installation; Electrical Connection - Mettler Toledo InPro 8300 Serie Guía De Configuración Rápida

en
16
Operating conditions
Ambient temperature
Product temperature
Temperature compensation 0 ... 50 °C in steps of 0.5 °C
Rel. humidity
Protection class
Storage temperature
Temperature measurement (in electronics)
Measuring range
Accuracy tolerance
Humidity measurement (in electronics)
Measuring range
Accuracy tolerance
** Model dependent
4

Sensor Installation

1 VARINLINE housing
2 Hinged clamps
3 Passive electronic part of the InPro 8300 RAMS
4 Active electronic part of the InPro 8300 RAMS
5 Threaded ring
7 OPL bit
9 O-ring, 60 × 3
10 O-ring, 34.59 × 2.62
11 Spacer (only when 2 OPL bits are used)
12 Threaded ring
13 Thrust ring
14 Window 28 mm
15 O-ring, 22 × 3
16 Securing pin
17 Recess for desiccant capsule
4.1

Electrical connection

The InPro 8300 RAMS is supplied with the connection cable
firmly connected between the active and passive parts. Once
the InPro 8300 RAMS has been installed mechanically, the
electrical connections can be established.
Cable diameter: 4 ... 10 mm
Core cross section: 0.75 mm
InPro 8300 RAMS
© 06 / 2019 Mettler-Toledo GmbH
30 313 396 B
InPro 8300 Turbidity Sensors
0 ... 40 °C
0 ... 105 °C (140 °C as option)
0 ... 100 %
IP 67
– 40 ... + 125 °C
– 40 ... 120 °C
Max. ± 3 °C (absolute)
0 ... 100 %
Max. ± 2.5 % absolute
2
InPro 8300 Turbidity Sensors
Printed in Switzerland