vitapur VUV-S375B Instrucciones De Instalación Y Manual Del Propietario página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

nSf d
t
ata
agS
You must attach the following Class B tag to the UV system.
Class B System:
This system conforms to NSF/ANSI Standard 55 and CSA
B483.1 for the supplemental bactericidal treatment of
disinfected public drinking water or other drinking water
that has been tested and deemed acceptable for human
consumption by the state or local health agency having
jurisdiction. The system is only designed to reduce normally
occurring non-pathogenic nuisance microorganisms.
Class B systems are not intended for the disinfection of
contaminated water.
WARNING
This Product can expose you to chemicals including
Diisononyl phthalate (DINP) which is known to the State of
California to cause cancer and Mercury Compounds which is
known to the State of California to cause reproductive harm.
For more information go to www.p65Warnings.ca.gov
Always install and operate the unit in an environment
where both air and water temperature will normally range
between 36°F (2°C) and 104°F (40°C).
See instruction manual for use conditions.
Lamp should be replaced every year (9000 Hrs.) Ballast
has built in 365 day countdown timer.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vuv-s645bVuv-h375bVuv-h645b

Tabla de contenido