GF ER 52 Manual De Instrucciones página 28

EN
Instruction for use
3. Loosen screw 2 on the electrical position indicator.
4. Unscrew the transparent protective cover 3.
5. Pull upper cam 5 off.
6. Loosen threaded bolt 4.
7. Pull the base with spindle 6 out of the housing 7.
8. Type ER 52:
- Complete spindle with respective connecting piece
- Turn brass by 180°.
9. Screw the base 6 with a wrench in the actuator.
10. Screw the spindle 7 with an Allen key into the spindle nut of the actuator
(Attention: left thread).
26
Installation