Kenmore 119.16144210 Manual De Uso Y Cuidado página 22

Idiomas disponibles

InstallGreaseTrayand GreasePan

From thebackandunderneath, insert t heGrease Trayalong

the two side panels of the Firebox. The

tray must be inserted with the grease pan drain towards the Cabinet Left Panel side as shown (Inset

1). Slide Grease Tray fully in until it locks into place behind stops.

Insert Grease Pan under Grease Tray as shown.

Slide Pan fully in until it locks into place behind stop.

Grease Tray

Grease

Inset 1

Place and Secure

LP Cylinder

into the Cabinet

Hook the ends of the Cylinder Support Ring into the two holes in the left front and rear legs (Inset 1).

Note:

You may need to spread the ends apart for the ring to reach and securely fit into the holes.

Place the LP Cylinder down into the tank support hole in the bottom of the Cabinet.

Face the tank

valve to the right.

Wrap the Cylinder Support Ring around the top of the tank and hook into place

(Inset 2).

Inset 2

Inset 1