Tabla de contenido
Publicidad
Failling to comply with these safety instructions may lead to serious bodily injury or damage to the equipment.Please read carefully the safety instructions
below before operating the machine.
TRAINING
A1. Read the instructions carefully before using the lawnmower. Be familiar with
the controls and their proper use before using the equipment. Know how to
stop the engine rapidly.
A2. Use the lawnmower for the purpose it is intended for, that is mowing and
collecting grass. Any other use could be dangerous or damage the equipment.
A3. Never allow children or people unfamiliar with these instructions to use the
lawnmower. Local regulations may restrict the age of the operator.
A4. Never mow when:
- People, especially children, or pets are nearby.
- User is under medication or has swallowed substances known to affect
judgement or reactions.
- There is a risk of advese weather such as lightning or a storm.
A5. Keep in mind that the owner or user is responsible for accidents or hazards
occurring to other people or their property.
PREPARATION
B1. While mowing, always wear substantial footwear and long trousers.
Do not operate the equipment when barefoot or wearing sandals.
B2. Thoroughly inspect the area where the equipment is to be used and remove
all objects which may be thrown by the machine (stones, branches, wires,
bones, etc...).
B3. WARNING ! Petrol is highly flammable.
- Store fuel in containers specifically designed for this purpose.
- Refuel outdoors only, before starting the engine and do not smoke while
refuelling or handling fuel.
- Never remove the cap of the fuel tank or add petrol while the engine is
running or when the engine is hot.
- If petrol is spilled, do not attempt to start the engine but move the machine
away from the area of spillage and avoid creating any source of ignition until
petrol vapours have dissipated.
- Replace all fuel tanks and container caps securely.
- Before tipping the lawnmower to maintain the cutting means or drain oil,
remove fuel from tank.
B4. Replace faulty silencers.
B5. Before use, always visually inspect the machine, especially to see that the
cutting means, cutting-means bolts, and cutting-means assembly are not
worn or damaged. Replace worn or damaged cutting means and cutting-
means bolts in sets to preserve balance
OPERATION
C1.
Do not operate the engine in a confined space where dangerous carbon
monoxide fumes can collect.
C2.
Mow only in daylight or in good artificial light.
C3.
If there is a risk of adverse weather such as lightening or a storm, stop operation.
C4.
Avoid operating the equipment in wet grass, where possible.
C5.
While mowing, always keep the safety distance to the cutting means, which
is provided by the handle length.
C6.
Walk, never run. Do not let yourself be pulled by the lawnmower.
C7.
Always be sure of your footing on slopes. Mow across the face of slopes,
never up and down.
C8.
Exercise extreme caution when changing direction on slopes.
C9.
Do not mow slopes of more than 20°.
C10. Use extreme caution when pulling the lawnmower towards you.
C11. Stop the cutting means if the lawnmower has to be tilted for transportation
when crossing surfaces other than grass, and when transporting the
lawnmower to and from the area to be mowed.
C12. Never operate the lawnmower with defective guards or cutting-means
enclosure, or without safety devices such as deflectors and/or grass catcher.
C13. Do not change the engine governor settings or overspeed the engine.
1
2
1
1. Warning: Read the owner's manual before using the lawnmower.
2. Risk of projections: Keep third persons away from the area during use.
3. Risk of cuts. Rotating cutting means: Do not put hands or feet inside the
cutting-means enclosure. Disconnect the spark plug cap before performing
any operation of maintenance or repairs.
4. Do not operate without either discharge guard or grass catcher in place.
5. The muffler becomes very hot during operation and remains hot for a while
after stopping the engine.
6. The engine emits toxic carbon monoxide. Do not run in an enclosed area.
7. Petrol is highly flammable. Stop the engine before refueling.
8
SAFETY INSTRUCTIONS
4
3
5
6
7
C14. Disengage all cutting-means controls and drive clutch before starting the
engine.
C15. Start the engine carefully according to instructions and with feet well away
from the cutting means.
C16. Do not tilt the lawnmower when starting the engine. Start the lawnmower on
a level surface, free of high grass or obstacles.
C17. Keep hands and feet away from the rotating parts.
Do not start the engine when standing in front of the discharge opening.
C18. Never pick up or carry a lawnmower while the engine is running.
C19. Stop the engine and disconnect the spark plug cap in the following cases:
- Before any operation under the cutting-means enclosure or the discharge
chute.
- Before checking, cleaning, or working on the lawnmower.
- After striking a foreign object. Inspect the lawnmower for damage and
make repairs before restarting and operating the lawnmower again.
- If lawnmower starts to vibrate abnormally, check immediately the cause
of the vibration and perform the necessary repair.
C20. Stop the engine in the following cases:
- Whenever you leave the lawnmower unattended.
- Before refuelling.
- When installing or removing the grass catcher.
- Before adjusting the cutting height.
C21. Close the fuel shut-off valve by turning the fuel shut-off valve.
C22. Using any attachments other than those recommended by this manual may
cause damage to your lawnmower, and such damage will not be covered by
your guarantee.
MAINTENANCE, STORAGE AND TRANSPORT
D1.
Keep all nuts, bolts and screws tight to be sure the equipment is in safe
working condition. Regular maintenance is an essential aid to user's safety
and retaining a high level of performance.
D2.
Never store the equipment with petrol in the tank inside a building when
vapours may reach an open flame, spark or high temperature source.
D3.
Allow the engine to cool before storing in any enclosure.
D4.
To reduce the fire hazard, keep the lawnmower, especially the engine and
silencer, the petrol storage area as well, free of grass, leaves, or excessive
grease.
Do not leave containers of vegetable matters in or near a building.
D5.
If the fuel tank has to be drained, this should be done outdoors, with a cold
engine.
D6.
Check the grass catcher frequently for wear or deterioration.
D7.
Do not use the machine with worn or damaged parts.
Parts must be replaced, not repaired. Replace worn or damaged parts with
HONDA genuine parts. Cutting means must always bear the mark Honda
and the reference number. Non equivalent quality parts may damage the
machine and be prejudicial to your safety.
D8.
Wear thick gloves when removing or installing the cutting means, or when
cleaning the cutting-means enclosure.
When tightening or loosening the cutting-means bolts, use a wooden block to
prevent the cutting means from rotating.
D9.
Always make sure the correct balance of the cutting means when sharpening.
D10. It is advisable to use a loading platform or to seek the help of another person
when loading or unloading the lawnmower.
When the lawnmower is transported, make sure that it is in the horizontal
position, close the fuel shut-off valve, disconnect the spark plug and secure
the appliance with straps.
D11. Check that the engine and the cutting means stop quickly when you release
the cutting-means control. Have your dealer check the flywheel brake pad
yearly or every 100 hours of operation, whichever comes first.
SAFETY LABELS
A
8
9
10
A. IDENTIFICATION OF THE MACHINE
8. Sound power level
9. CE marking
10. Nominal power in kilowatt
11. Year of manufacture
12. Recommended engine speed in rpm
13. Mass in Kilograms (with empty tanks)
14. QR code
15. Serial number
16. Model - Type
17. Name and address of the manufacturer
17
16
15
11 12
13
14
Publicidad
Tabla de contenido
