Note: The hook is not correctly positioned if it is still in bottommost position.
9
Slide the brewing unit back into the machine along the guiding rails
on the sides until it clicks into position.
Do not press the PUSH button.
10
Close the maintenance door.
11
Slide the coffee grounds container back into the machine.
Lubrication
For optimal performance of the machine, lubricate the brewing unit after
it has brewed 500 cups of coffee or once every 3 months. Contact the
Philips Saeco hotline to buy lubricant.
1
Turn off the machine and unplug it.
2
Follow steps 2 to 4 in section 'Cleaning the brewing unit' to remove
the brewing unit from the machine.
3
Apply some lubricant around the shaft in the bottom of the brewing unit.
4
Apply some lubricant to both sides of the part shown in the
illustration.
ENGLISH
21