Using The Machine; Brewing 1 Or 2 Cups Of Espresso Or Regular Coffee - Saeco HD8645/57 Manual De Instrucciones

Using the machine

To guarantee perfect espresso, the machine regularly rinses its inner circuit
with water. This automatic rinsing cycle takes place 15 minutes after the
appliance switches to standby mode or turns off. During the automatic
rinsing cycle, some of the water flows through the inner circuit directly into
the drip tray. Empty the drip tray regularly.

Brewing 1 or 2 cups of espresso or regular coffee

1 Make sure the on/off button illuminates green continuously and the
control dial points to the coffee bean icon.
2 Place 1 or 2 cups on the drip tray cover.
3 Press the espresso button or regular coffee button.
Note: You can interrupt the brewing cycle at any time. To do this, press the
same button (for espresso or regular coffee) that you pressed to start brewing
coffee.
- Press the espresso button or regular coffee button once to brew 1 cup
of coffee.
The machine grinds the required amount of coffee beans for one cup
,
and then brews one cup of coffee.
- Press the espresso button or regular coffee button twice to brew
2 cups of coffee.
The 2-cup light illuminates. The machine grinds the required amount
,
of coffee beans for one cup and then fills both cups half. Then the
machine grinds coffee beans for one cup again and fills both cups
fully.
4 Press the on/off button to turn off the machine.
If you only brewed one cup of coffee, the machine briefly rinses the
,
inner circuit before it turns off.
Note: When the machine is left in standby mode, it turns off automatically
after 30 minutes.
ENGLISH
15