Cooper FAIL-SAFE FFL Serie Instrucciones De Instalación página 2

Installation Instructions – FFL Series Industrial LED Floodlights
INSTALLATION
Mounting
Yoke Mount - Post Mount Using Floodlight Yoke Only
1. Using floodlight yoke as a template, mark and drill
desired location on mounting surface.
2. Secure floodlight yoke to surface using 1/2" bolts or lag
screws (not provided).
Wiring
Wiring oht FlNNdligho
1. All components in the fixture are prewired so only line
in, neutral, and ground need to be connected in the
fixture to the lead wires (or terminals) per the Wiring
Diagrams using methods that comply with all applicable
codes. Terminate the equipment grounding conductor
Wiring Diagrams
100V to 277V 50 or 60Hz Input or 108 to 150V DC Input FFL -11L
100V to 277V (BLK)
NEUTRAL (WHT)
GROUND (GRN)
347V or 480V 60Hz Input FFL -11L 137W Version (Other Version Wiring will vary*)
TRANSFORMER
347V or 480V
(BLU or RED)
NEUTRAL (WHT)
GROUND (GRN)
N Note: 5L version will have two (2) drivers and four (4) LED's. 7L version will have two (2) drivers and six (6) LED's. 9L
version will have three (3) drivers and eight (8) LED's. For DC wiring, attach positive (+) lead to line out (BLK) and
attach negative (-) lead to neutral (WHT) wire.
2
INPUT
LINE IN (BLK)
NEUTRAL (WHT)
INPUT
LINE IN (BLK)
NEUTRAL (WHT)
INPUT
LINE IN (BLK)
NEUTRAL (WHT)
INPUT
LINE IN (BLK)
NEUTRAL (WHT)
LINE OUT (BLK)
NEUTRAL (OUT)
InsoallaoiNn InsorucoiNns – FFL Strits Indusorial LED FlNNdlighos
IF 1629 FS ADC140282
(green) first, the common (white) next, and finally, the
line voltage (black) last. For DC voltage applications,
connect the positive (+) lead to the white wire and the
negative (-) lead to the black wire. Tighten all electrical
connections.
Figurt 1.
DRIVER OUTPUT
V+(RED)
V-(BLK)
OUTPUT
DRIVER
V+(RED)
V-(BLK)
OUTPUT
DRIVER
V+(RED)
V-(BLK)
OUTPUT
DRIVER
V+(RED)
V-(BLK)
INPUT
DRIVER
OUTPUT
LINE IN (BLK)
V+(RED)
NEUTRAL (WHT)
INPUT
OUTPUT
DRIVER
LINE IN (BLK)
V+(RED)
NEUTRAL (WHT)
INPUT OUTPUT
DRIVER
LINE IN (BLK) V+(RED)
NEUTRAL (WHT)
INPUT OUTPUT
DRIVER
LINE IN (BLK)
V+(RED)
NEUTRAL (WHT)
www.cooperlighting.com
LED SUBARRAY
LED SUBARRAY
LED ARRAY
LED SUBARRAY
LED SUBARRAY
LED SUBARRAY
V-(BLK)
LED SUBARRAY
V-(BLK)
LED ARRAY
LED SUBARRAY
V-(BLK)
LED SUBARRAY
V-(BLK)