Friedrich KCS08 Manual De Instalación Y Funcionamiento página 39

Cord Routing Change continued
STEP 19. Carefully push electrical control panel back into chassis.
Figure 75
ELECTRICAL
CONTROL PANEL
STEP 20. Reinstall the 3 screws removed earlier to secure electrical
control panel.
Figure 76
ELECTRICAL CONTROL PANEL SCREWS (3)
(RETAINED FROM STEP 1)
STEP 21. If running power cord to the right of the unit, install the cord into
the cord retainer clips along the bottom front of the unit.
Figure 77
CORD RETAINER
CLIPS
FRR059
FRONT
GRILLE
FRR060
POWER
CORD
FRR061
39