Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
General Operation
1.
Set the selector to the proper setting and connect the test leads to the meter.
2.
Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning circuit, replace the batteries.
• If the unit still does not function as expected, send the unit to Greenlee for repair. See the
address shown under Warranty.
3.
Take the reading from the circuit or component to be tested.
Typical Test Voltages
6
5
4
3
2
1
0
0,1
Electric shock hazard:
Contact with live circuits could result in severe injury or death.
1
Resistance under test (MΩ)
MΩ 5000V
MΩ 2500V
MΩ 1000V
MΩ 500V
10
100
5990
∝
7
Publicidad
Tabla de contenido
