Textron Greenlee LCS-144 Manual De Instrucciones página 19

Operation—Power Tool (cont'd)
2. Make sure the blade stops. Even though the tool
has a brake, before setting the tool down, make
sure the blade has come to a complete stop and
the lower guard has closed.
3. Do not use if anything seems unusual. Remove
battery pack immediately. If the tool body
becomes very hot or does not work properly,
remove the battery pack and do not use. Have it
checked by an authorized service center.
To prevent the risk of serious personal injury or fire,
do not try to repair the tool. Never disassemble or
modify the tool body. There are no user-serviceable
parts.
Fig. 13
4. Never allow the tool to come in contact with
your body. After completing a cut, do not allow
the tool to brush against your leg or side. Because
the lower guard is retractable, it could catch on
your clothing and expose the blade. Keep clothing
away from tool. Be aware of the exposed blade
sections that exist in both the upper and lower
guard areas.
• Always use safety goggles because cutting metal
creates sparks.
• Do not use tool near any flammable substance or
in an area where flammable substances are used.
Fire and burn injury could result.
5. Never engage the spindle lock while the blade is
running, or engage in an effort to stop the tool.
Never turn the switch on when the spindle lock is
engaged. Serious damage to your tool will result.
19
LCS-144