Erreka NAOS Guía Rápida De Instalación Y Programación página 10

1 Secure the track (1) in the operator (2). This can be
placed in two different positions (0º/180º); choose the
one you prefer.
1
2
3 Mount the track (1) + operator (2) on the supports (3) and (4).
4 Position the anchoring (5) in the upper part of the door using the arms
(6) and (7), and couple it to the carriage (8).
5
10
Assembly
1
2
0º /180º
P260A
O
The track (1) must be horizontal.
5
7
2 Position the overhead strips (3) and front support (4).
Bear in mind assembly level H (see "assembly levels"
on the previous page).
5 Make the chain taut: tighten the nut
as far as possible, and then loosen it
slightly until the sleeve can be
turned by hand.
8
6
P260D
3
4
P260B
P260C1
P260E