Safety Instructions; Connecting To The Power Supply - T-Fal RAPID PRO Manual Del Usuario

Read and follow the instructions for use. Keep them for future use.

SAFETY INSTRUCTIONS

1. This appliance complies with the safety regulations and
conditions in effect at the time of manufacture.
2. Check that the power supply voltage corresponds to that
shown on the appliance (alternating current) and that
there's a grounded plug.
3. Given the diverse standards in effect, if the appliance is used
in a country other than that in which it is purchased, have it
checked by an approved service center.
4. This appliance is intended for household use only.
5. In case of commercial use, inappropriate use or failure to
comply with the instructions, the manufacturer accepts no
responsibility and the guarantee does not apply.
6. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
7. Children should be supervised to ensure that they do not
play with the appliance.
8. Replace the sealing gasket every 2 years, or sooner if you
see the gasket is worn or in need of replacement. Use only
original parts available in authorized repair centers.

CONNECTING TO THE POWER SUPPLY

1. Make sure the plug is connected properly to both the
appliance and the outlet.
2. Only connect the appliance to grounded electrical outlet. If
the sockets and plug on the appliance are not compatible,
consult a professional qualified technician to replace the
outlet with a more suitable one.
3. Do not use the appliance if:
- It or its cord is damaged.
- The appliance has been dropped, shows visible damage, or
does not work properly.
8