Product Description And Specifica- Tions - Bosch GKS 190 Professional Manual Original

Ocultar thumbs Ver también para GKS 190 Professional:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OBJ_BUCH-813-004.book Page 15 Monday, February 9, 2015 5:09 PM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e. g., profiles, can al-
so be sawed.
Working ferrous metals is not permitted.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Lock-off button for On/Off switch
3 Auxiliary handle (insulated gripping surface)
4 Spindle lock button
5 Scale for mitre angle
Technical Data
Circular Saw
Article number
Rated power input
No-load speed
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Mounting bore
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-5.
Typically the A-weighted noise levels of the product are:
Sound pressure level 96 dB(A); Sound power level
107 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Bosch Power Tools
6 Wing bolt for bevel-angle preselection
7 Wing bolt for parallel guide
8 Cutting mark, 45°
9 Cutting mark, 0°
10 Parallel guide
11 Retracting blade guard
12 Base plate
13 Lever for retracting blade guard
14 Chip ejector
15 Blade guard
16 Handle (insulated gripping surface)
17 Hex key
18 Clamping bolt with washer
19 Clamping flange
20 Saw blade*
21 Mounting flange
22 Saw spindle
23 Extraction adapter*
24 Clamping lever for cutting-depth preselection
25 Cutting-depth scale
26 Wing bolt for bevel-angle preselection
27 Set of screw clamps**
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
GKS 190
3 601 F23 0.0
W
1400
-1
min
5500
mm
70
mm
50
mm
302 x 140
mm
190
mm
184
mm
2.0
mm
30
kg
4.2
/ II
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-5:
2
2
a
<2.5 m/s
, K=1.5 m/s
.
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
English | 15
GKS 190
3 601 F23 0.1
1400
5500
67
49
302 x 140
184
184
2.5
16
4.2
/ II
1 609 92A 14T | (9.2.15)

Publicidad

Tabla de contenido
loading

Tabla de contenido