Product Description And Specifications; Intended Use; Product Features - Bosch GCM 12 SD Professional Manual Original

OBJ_BUCH-1130-003.book Page 27 Friday, December 5, 2014 12:37 PM

Product Description and Specifications

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, hori-
zontal mitre angles from –52° to +60° as well as vertical bevel
angles from 47° (leftward) to 47° (rightward) are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood.
The power tool is not suitable for cutting aluminium or other
non-ferrous metals or alloys.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Dust bag
2 Hex key (1.5 mm)
3 Open-end spanner (17 mm; 10 mm)
4 Transport handle (front)
5 Clamp for handle
6 Tongue for grade-adjustment of handle
7 Handle
8 Button for releasing locking lever 43
9 Saw blade
10 Retracting blade guard
11 Roller
12 Insert plate
13 Locking bracket
14 Locking knob for various mitre angles
15 Mitre detent lever
16 Bevel lock lever
17 Detents for standard mitre angles
18 Saw table
19 Mounting holes
20 Fence
21 Fence extension
22 Locking screw for fence extension
23 Quick-action clamp
24 Angle indicator (vertical) for rightward bevel angle
range
0 – 45°
25 Slide device
26 Cable holder
Bosch Power Tools
27 On/Off switch
28 Transport safety-lock
29 Adjusting screw of depth stop
30 Transport handle (rear)
31 Locking screw for slide device
32 Scale for bevel angle
33 Angle indicator (vertical) for leftward bevel angle
range
45°– 0
34 Adjustment knob for 33.9° bevel angle
35 Socket spanner (14 mm)/Hex key (4 mm)/Cross-head
screwdriver
36 Lock screw of the material stop
37 Material stop
38 Saw-table extension
39 Tensioning lever for saw-table extension
40 Scale for mitre angle
41 Rotary knob for adjustment of the bevel angle range
42 Spindle lock
43 Locking lever
44 Extraction adapter
45 Chip ejector
46/47 Cross-head screw (attachment of retracting blade
guard)
48 Hexagon bolt for saw-blade attachment
49 Washer
50 Clamping flange
51 Interior clamping flange
52 Holes for quick-action clamp
53 Clamping lever of the quick-action clamp
54 Threaded rod
55 Screws for insert plate
56 Clamping screw of the material stop
57 Button for rapid-setting of the adjusting screw 29
58 Depth stop
59–62 Set screws for 0° basic setting (bevel angle)
63 Set screw for 45° basic setting (leftward bevel angle)
64 Set screw for clamping force of lock lever 16
65 Set screw for clamping force of clamp 5
66 Mitre angle indicator
67 Adjustment screw of the fence extension
68 Hex socket screws (14 mm) of the fence
69 Recessed handles
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
English | 27
1 609 92A 0XM | (5.12.14)