To Associate Calybox 1020, Calybox 2020; Tybox 1010, Tybox 2010, Tybox 2020; To Associate X3D Thermal Receivers; To Associate Rollia X3D Roller Shutter Motors Or Roller Shutter Receivers (Unit 1) - DELTA DORE TTRTC TYXAL+ Manual De Instalación

8.3 To associate CALYBOX 1020, CALYBOX 2020,

TYBOX 1010, TYBOX 2010, TYBOX 2020

• Set the product to association wait mode (refer to the user guide).
• From the main menu, type #401 then type 1
• The transmitter displays: "Configuring..."
After a few seconds, the transmitter announces the product found
on the installation:
Example: "1 thermal points associated".

8.4 To associate X3D thermal receivers

• Set all the receivers to association wait mode (refer to the user guides).
• From the main menu, type #400 then type 1
• The transmitter displays: "Configuring..."
After a few seconds, the transmitter announces the number of receivers found on
the installation:
Example: "5 thermal points associated, 0 repeater associated".
Check that:
• the LED of the receivers has stopped flashing.
8.5 To associate ROLLIA X3D roller shutter motors
or roller shutter receivers (unit 1).
• Set all motors and all receivers
to association wait mode. (see its guide)
• From the main menu, type #410 then type 1
• The transmitter displays: "Configuring..."
After a few seconds, the transmitter announces the number of roller shutters
found on the installation:
Example: "3 roller shutters associated, 2 repeater associated".
Check that:
• the association was successful: the motors briefly start twice
• the LED of the receivers has stopped flashing.
Repeat the same procedure to associate the roller shutters of unit 2, by typing #411
63
18:28
11.5°C Lun. 23 Septembre
EN
Conso Thermique Eau chaude
Volets Autres Scénarios
31
Calendrier Réglages Ouvrant