11. Telephone line LED status
11.1 TTRTC TYXAL+
LED status
Flashing red *
Green on
and steady *
Flashing
green
Off
(*) The LED remains on:
- for 5 minutes after switching on
- for 1 minute when pressing button T1.
11.2 TTGSM TYXAL+
LED status
with mains power
Flashing
red
Flashing
green/orange
Green
Steady
Green
flashing
If there is no mains power, the LED remains on for:
- 5 minutes after switching on
- the transmission of an event
- 1 minute when pressing button T1
- 5 minutes after a mains power failure
The telephone transmitter permanently checks the telephone line.
For a telephone line defect, this symbol
is displayed on the touch screen keypad. Dial your access code to
discover the details of the defects.
Description
No PSTN line
PSTN line present
Call in progress
Normal operation,
incoming and outgoing calls are possible.
LED status
Description
without mains
power
Off
No GSM reception
Off
Weak GSM reception
Off
Good GSM reception
Off
Call in progress
Button/LED
Press the button on the
front panel to view the
status of your telephone
line.
If there is no mains power, the
TTGSM TYXAL+ continues to
send the alarms but cannot be
controlled remotely.
72
25/11/15
25/11/15
12:48
12:48
OFF
OFF
My house
My house
Info
Info
Settings
Settings