Installing The Axis 292; Connecting A Tv Monitor To The Axis 292; Connecting The Power And Network Cables - Axis 292 Guia De Instalacion

AXIS 292 Installation Guide

Installing the AXIS 292

The AXIS 292 is supplied with a mounting kit for wall or rack mounting. The mounting
brackets can be positioned for mounting the network video decoder on a vertical surface or in
a rack (4U). Follow the instructions below to attach the mounting bracket to the video server:
1. Slide the grey frame off the front panel of the network video decoder (no tools needed).
2. Insert the metal plates in the slots on each side of the network video decoder.
3. Position and attach the brackets on each side using the provided screws.

Connecting a TV monitor to the AXIS 292

Check the TV monitor to see which connectors are available. S-video is recommended if
available. Connect the TV monitor to the appropriate video output connector:
• RCA
• BNC
• Y/C (S-video)

Connecting the power and network cables

1. Connect the AXIS 292 to the network using a standard network cable.
2. Connect power using the power adaptor supplied with the product.
3. Check that the LED indicators show the correct conditions. See the table on page 4 for
further details.
grey
metal
frame plate
bracket
Page 5