Using An Aux Input; Rear Display - Pioneer AVH-X8800BT Manual De Instalación

Connection

Using an AUX input

1
3
6 7
4
8
9 a
b
1 This product
2 AUX input
3 Yellow
4 Red, white
5 Mini-jack AV cable (CD-RM10) (sold separately)
6 To Yellow
7 To Red, white
8 RCA cables (sold separately)
9 To video output
a To audio outputs
b External video component (sold separately)
p The appropriate setting is required to use the external video
component.
 Refer to the operation manual.
p When connecting an external video component using a mini-
jack AV cable, use a separately sold AUX extension cable as
necessary.
CAUTION
Be sure to use a mini-jack AV cable (CD-RM10) (sold
separately) for wiring. If you use other cables, the wiring
position might differ resulting in disturbed images and
sounds.
OK
2
L
G R
V
Using an HDMI input
5
1
2
1 This product
2 HDMI port
3 High Speed HDMI
4 HDMI device (sold separately)
p When you connect the High Speed HDMI
lock tie to fix it securely.
 Refer to Securing the High Speed HDMI
L : Left audio (White)
R : Right audio (Red)
L
V : Video (Yellow)
G V
R
G : Ground
4
3
® Cable (sold separately)
® Cable, use the
Cable on page 7
®

Rear display

1
2
3
4
5
6 7
8
1 This product
2 Yellow (V OUT)
3 Rear audio output
4 Mini pin plug cable (sold separately)
5 RCA cables (sold separately)
6 To audio inputs
7 To video input
8 Rear display with RCA input jacks (sold separately)
WARNING
NEVER install the rear display in a location that enables the
driver to watch video images while driving.
This product's rear video output is for connection of a display
to enable passengers in the rear seats to watch the video
source.
9