Vision AV-1800 Manual Del Propietário página 8

BLUETOOTH INPUT
DEFAULT PIN: 0000
When amp is turned on or when Bluetooth selected, the Bluetooth radio will be in pairing mode
for 10 minutes. The Blue LED will flash while in pairing mode, then stay on when paired.
If "Bluetooth Priority" is on the amplifier will automatically switch to the Bluetooth source when
a device is paired.
CHANGE BLUETOOTH DEVICE NAME AND PIN
1. DOWNLOAD AND INSTALL BLUESUITE SOFTWARE (WINDOWS ONLY) FROM
https://visionaudiovisual.com/techaudio/av-1800/
2. PAIR PHONE TO AMPLIFIER
3. PRESS BUTTON ON REAR OF AMP Release when Blue LED on front turns off
4. CONNECT PC TO AMP WITH USB CABLE (NOT INCLUDED)
5. RUN PSTool APPLICATION. Select USB\csr0 port as below
NOTE: if port is not showing load drivers manually from
C:\Program Files (x86)\CSR\BlueSuite 2.6.4\drivers
8
AV-1800_manual_en.doc