Technical Specifications - HK Audio LUCAS 1000 Manual De Instrucciones

L.U.C.A.S 1000 Manual 2.0
This is to certify that
®
HK AUDIO L.U.C.A.S
complies with the provisions of the Directive of
the Council of the European Communities on the
approximation of the laws of the Member States
relating to electromagnetic compatibility
(EMC Directive 89/336/EEC) and the low voltage
Directive (73/23/EEC).
This declaration of conformity of the European
Communities is the result of an examination car-
ried out by the Quality Assurance Department of
STAMER GmbH in accordance with European
Standards EN 50081-1, EN 50082-1and EN
60065 for low voltage, as laid down in Article 10
of the EMC Directive.
Stamer Musikanlagen GmbH*
Magdeburger Str. 8
66606 St.Wendel
Lothar Stamer Dipl.Ing.
Managing Director
St.Wendel, 05/30/02
* Stamer Musikanlagen manufactures exclusively
for HK AUDIO ® .

Technical Specifications

®
1000
L.U.C.A.S ® 1000 Subwoofer
Inputs / Outputs:
Line In: XLR female (pin 1 = Ground; 2 = +, 3 = -)
Input: electronically balanced & floating
Input impedance: 47 k ohms
Sensitivity: -6 dBV (= 0.5V) (set to the far right position)
Max. input level: +24 dB
Parallel out: XLR male (pin 1= Ground; 2=+, 3= -)
Speaker outs: Speakon
Amplifiers:
Subwoofer power output: 600 W / 8 ohms @ 1% THD
Satellite power output: 2 x 150 W / 4 ohms @ 1% THD
Protection circuitry: DynaClip™ Limiter for
subwoofer amplifier, Subsonic Filter, Opto-limiter for
mid/high amplifier
Active crossover:
Crossover frequency: 130 Hz; 24 dB / octave
Loudspeakers:
Speaker: 1x 15" B&C
Overall nominal impedance: 8 Ohms (passive)
Subwoofer frequency response: 47 Hz – 130 Hz, ± 3dB
Nominal power handling capacity: 600 W RMS
Sound pressure level 1W / 1m: 102 dB (half space)
Max. sound pressure level / 1m: 127 dB @ 10% THD
(200 Hz – 5 kHz average, half space)
Weight and dimensions:
Weight: 42.5 kg / 94 lbs.
Dimensions incl. casters (WxHxD):
44 cm x 54 cm x 65.5 cm / 21.2" x 17.3" x 25.8"
L.U.C.A.S
Inputs:
Speaker input: Speakon
Loudspeakers:
LF/MF woofer: 1x 8" HK AUDIO
HF driver: 1x 1" CD Horn
Directivity: 90° x 40°
® NL 4 (pin 1+ = +, 1- = -) Overall nominal impedance: 4 Ohms
Nominal power handling capacity: 200 W RMS
Sound pressure level 1W / 1m: 101 dB (half space)
Max. sound pressure level / 1m: 123 dB @ 10% THD
(200 Hz – 5 kHz average, half space)
Frequency response
(via active crossover): 130 Hz – 19 kHz, +/- 3dB
Crossover frequency (passive): 2.5 kHz; 12 dB / octave
Protection circuit for tweeters: light bulb
Weight and dimensions:
Weight: 9.5 kg / 21 lbs.
Dimensions (WxHxD): 24.5 cm x 40 cm x 23 cm /
9.6" x 15.7" x 9"
Overall System
Weight: 61.5 kg
Dimensions incl. casters (WxHxD):
43.5 cm x 87 cm x 53.5 cm / 17.2" x 34.25" x 21.1"
General electrical data:
Protection class 1 (protectively earthed)
Max. current consumption: 6 A (230 V), 12 A (117 V),
14 A (100 V)
Max. power consumption: 1400 VA
Mains voltage range: +/- 10%
Ambient temperature range: from -10° C to +60° C /
from 14° F to 140° F
Internal fuses: 2x SB 5 A for preamp and power amp
operating voltage
® 1000 Satellite
®
NL 4 (pin 1+ = +, 1- = -)
® Custom