Technical Specifications - HK Audio LUCAS NANO 602 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5 Technical Specifi cations
LUCAS NANO 602 System
Total power output*
Frequency response +/- 3 dB
Active protective circuits
Inputs
Outputs
Enclosure
Optional accessories
Weight
LUCAS NANO 602 Satellite
Max SPL peak**
Max SPL**
Frequency response +/- 3 dB
Woofer
HF driver
Horn directivity
Nominal impedance
Inputs
Pole Mount Adapter
Dimensions (WxHxD)
Weight
LUCAS NANO 602 Subwoofer
Max SPL peak**
Max SPL**
Frequency response +/- 3 dB 43 Hz - 190 Hz
Bass woofer
Nominal impedance
Pole mount
Dimensions (WxHxD)
Weight
* measured according to EIA
** @10% THD, half space
460 W (300 W + 2 x 80 W) Class D
43 Hz – 20 kHz
MultiBand Limiter, Subsonic Filter,
Thermo Protection, Overload Protection
2 1/4" (6.3 mm) jack/XLR combo ports,
3.5 mm mini jack (stereo), Link In (for
Twin Stereo mode)
Speaker Out, Easy-Click, Thru, Link Out
(for Twin Stereo mode)
Coated polypropylene
S-Connect Pole LN (signal-routing
speaker pole), Stereo Stand Add-on,
Roller Bag (padded trolley), Desk/Wall
Mount, Link Cable, Drum Rack Adapter
16.3 kg / 35.9 lbs.
124 dB (Single Satellite)
130 dB (Satellite Array)
119 dB (Single Satellite)
124 dB (Satellite Array)
190 Hz – 20 kHz
4,5"
1" HK Audio Multicell Transformer
90° x +10/-45° (Single Satellite)
90° x 30° (Satellite Array)
8 ohms (Single Satellite)
4 ohms (Satellite Array)
Speaker In, Easy-Click
3/8" thread
14.5 x 14.5 x 13.5 cm
1.2kg / 2.6 lbs.
123 dB
120 dB
10"
8 ohms
M33 for the (signal-routing) S-Connect
Pole LN, a speaker pole adapter sleeve
(M33 to M20) is included
35 x 49 x 47 cm
13.9 kg / 30.6 lbs.
General Technical Specifi cations
Peak current
3A / 220-240V AC • 6A / 100-120V AC
Current consumption
0.7A / 220-240 V AC • 1.5A / 100-120V AC
pursuant to EN 60065***
Inrush current
70 A at 120 V and 230 V
*** Current consumption (mains power) was measured at the internal amplifier's output at 1/8 power
by inputting a sine wave as specified in the EN60065 standard. This value represents the average
current drawn from the mains grid when operating the system with standard music signals.
LUCAS NANO 602 1.0
11

Publicidad

Tabla de contenido
loading

Tabla de contenido