Operation - Klarstein Gran Reserva 166 Manual Del Usario

Operation

Initial operation
Plug in and switch on the cellar by pressing on the power button for a few seconds.
When you use the wine cellar for the first time (or restart the wine cellar after having it shut off for a long
time), there will be a few degrees variance between the temperature you have selected and the one indicated
on the LED readout. This is normal and it is due to the length of the activation time. Once the wine cellar is
running for a few hours everything will stabilize.
Operating Noises
To reach the desired temperature settings, VINICOLE wine cellars, like all wine cellars operating with com-
pressors and fans, may produce the following types of noises. These noises are normal and may occur as
follows:
• Gurgling sound - caused by the refrigerant flowing through the appliance' s coils.
• Cracking/popping sounds - resulting from the contraction and expansion of the refrigerant gas to produce
cold.
• Fan operating sound - to circulate the air within the wine cellar.
An individual' s perception of noise is directly linked to the environment in which the wine cellar is located,
20