Tabla de contenido
Publicidad
Enlaces rápidos
USA
EN Instructions for use
FIUS1701I239
WARNING:
Weight limits:
• Do not install or use this
booster seat until you read
40 – 120 lbs
and
understand
all
the
(18 – 54 kg)
instructions in this manual
and the labels. To avoid
serious
injuries
to
your
Height limits:
child, follow the instructions
carefully. Keep the instruction
39 - 63 inches
manual in the dedicated
(99 – 160 cm)
pocket for future reference.
Publicidad
Tabla de contenido
Manuales relacionados para Peg-Perego Viaggio SHUTTLE 120
Resumen de contenidos para Peg-Perego Viaggio SHUTTLE 120
- Página 1 EN Instructions for use FIUS1701I239 WARNING: Weight limits: • Do not install or use this booster seat until you read 40 – 120 lbs understand (18 – 54 kg) instructions in this manual and the labels. To avoid serious injuries your Height limits: child, follow the instructions...
-
Página 2: Tabla De Contenido
Vehicle seat design and compatibility ....15 Installing the booster seat in the vehicle .....16 Securing your child in the booster seat ....21 How to use the shoulder clip........23 Cleaning and maintenance ........26 Transport.............29 Serial number..............30 Replacement Parts ............30 © 2016 Peg-Perego. All rights reserved. -
Página 3: Introduction
Perego plant under certified quality procedures and using high quality materials from certified suppliers. As with all booster seats, the Viaggio Shuttle 120 is designed to be used with a child inside a vehicle. We encourage you to use the Viaggio Shuttle 120 with... - Página 4 • D will be able to access it for help. Should you see any malfunctioning feature or broken parts, please do not hesitate to call Peg-Perego Customer Service @ 1-800-671-1701 for help. Now • Y that you are familiar with your new Viaggio Shuttle 120, you are ready to enjoy safe and happy journeys •...
-
Página 5: Warning
Refer to the dedicated section in this manual for further details. • Viaggio Shuttle 120 can be secured to your vehicle by means of lower universal anchorage system (LATCH) for added stability. Refer to the dedicated section in this manual for installation details and check your vehicle owner’s manual for further details. - Página 6 You may need to get a new unit. • D Call Peg-Perego Customer Service at 1-800-671-1701 (toll free) for information about repairs or spare parts. • Seat covers and pads provided in this product are •...
-
Página 7: Safety Information
Safety Information • Use Viaggio Shuttle 120 in forward facing mode with children weighing in the range 40 – 120 lbs (18 – 54 kg) and whose height is between 39 and 63 inches (99 – 160 cm). • When placing your child in the seat, make sure that bulky jackets or covers are removed. -
Página 8: Registration Form
You must register this restraint to be reached in a recall. Send your name, address and the restraint's model number and manufacturing date to: Peg-Perego U.S.A., Inc. 3625 Independence Drive Fort Wayne, IN 46808 Or call 1-800-671-1701 (toll free) Or register online at www.carseat-registration.pegperego.com... -
Página 9: Your Booster Seat
Your booster seat Adjustable shoulder clip Armrest Rigid latch handle Transport handle Rigid latch connectors Rigid latch release button Seat... -
Página 10: Rigid Latch
Rigid Latch Viaggio Shuttle 120 is equipped with rigid latch. The rigid latch interface is composed of two connectors, located in the integrated base of the child restraint and two anchors located at the joint line between the seat and backrest of the vehicle. -
Página 11: Product Components
Customer Service @ 1-800-671-1701 for help. Vehicle seatbelts design and compatibility Viaggio Shuttle 120 is designed to be installed with lap and shoulder vehicle belts commonly fitted on most of the available cars. However, in the market there are several different types of vehicles manufactured in different periods. - Página 12 Vehicle seatbelts design and compatibility NON COMPATIBLE VEHICLE BELT DESIGNS WARNING: do not use Viaggio Shuttle 120 with the following vehicle belt design: 1. Lap/motorized 2. Lap belt only of any shoulder belts. Belts kind. mounted on the door...
- Página 13 Vehicle seatbelts design and compatibility Viaggio Shuttle 120 is a booster seat equipped with rigid latch. Although the rigid latch is used for added stability only, its use is recommended. When installing the seat, make sure that there is enough space between the attached seat and the vehicle belt buckle (fig_a).
- Página 14 Vehicle seatbelts design and compatibility...
-
Página 15: Vehicle Seat Design And Compatibility
Vehicle seat design and compatibility WARNING: do not use Viaggio Shuttle 120 with the following vehicle seat design: 1. Side facing seats 2. Rear facing seats or seats that rotate in different positions For your child’s safety, always read your vehicle... -
Página 16: Installing The Booster Seat In The Vehicle
IMPORTANT NOTE: use of LATCH connectors is recommended by Peg-Perego to achieve the best stability of the product in case of sudden or steep turns. Also, using the LATCH will give guarantee that the product is located in the correct position with respect to the vehicle belt attachment points. - Página 17 Installing the booster seat in the vehicle expose connectors located inside the base, pull the handle (fig_a) that is found in the cover opening (fig_b). The connectors will be ejected (fig_c). Repeat to make sure they have been ejected fully and simultaneously.
- Página 18 Installing the booster seat in the vehicle IMPORTANT: vehicle anchors and the booster seat connectors are correctly coupled when a green signal appears above the connectors (fig_a). A red signal indicates that the attachments have NOT been coupled correctly (fig_b) . 4.
-
Página 19: Installing The Booster Seat In The Vehicle
Installing the booster seat in the vehicle 5. To release Viaggio Shuttle 120 from the vehicle seat, pull the handle (1) and the seat until the release buttons on the side of the base are fully revealed. In so doing, click the yellow release buttons will be visible on the sides... - Página 20 Installing the booster seat in the vehicle attach booster seat on vehicle seats not equipped with latch anchor positions. 7. Place the Viaggio Shuttle 120 car seat on the vehicle seat in the direction of travel, leaving the connectors inside the base.
-
Página 21: Securing Your Child In The Booster Seat
Securing your child in the booster seat 1. Position the child in the seat as shown in picture, ensuring the booster seat does not move during this operation. 2. Secure your child with the vehicle seat belt as shown in the picture. - Página 22 Securing your child in the booster seat 3. Fasten the vehicle seat belt, ensuring that it clicks in place. Position the two sections of the belt as shown in the picture. click...
-
Página 23: How To Use The Shoulder Clip
How to use the shoulder clip complete installation process into the car, the adjustable shoulder clip can be used. To remove the clip from its location under the fabric of the seat, lift the rear portion of the cover (1), remove the clip from its housing (2) and pass through the handle (3). - Página 24 How to use the shoulder clip 3. Extend the shoulder clip strap by pressing the button located behind the booster seat (1) and pulling it upwards (2). 4. Insert the seat belt into the shoulder clip (picture detail), then lower the shoulder clip (1) by pulling the belt (2).
- Página 25 How to use the shoulder clip 5. The correct height of the shoulder clip is just above the shoulder level 1” (2,5 cm). 1" 2,5 cm Cup holders The car seat comes with a cup holder. Place the cup holder on the mushroom button, present on either side of the seat (fig_a), and secure it in place...
-
Página 26: Cleaning And Maintenance
Cleaning and maintenance Your booster seat requires a minimum of cleaning and maintenance. Do not clean with harsh products or solvents. Keep moving parts clean. In case, clean plastic parts with a damp cloth. Do not use water with harness and latching mechanisms. Protect the booster seat from extreme cold, water, rain and sun exposure. - Página 27 Cleaning and maintenance upholstery Viaggio Shuttle 120 may be removed for cleaning. 1. Follow the washing instructions on the seat lining. Removing the upholstery from the seat: Unhook eyelets from the buttons on the sides of the booster seat base.
- Página 28 Cleaning and maintenance 3. Release the plastic hooks from the seat base. Repositioning the booster seat cover: 4. Fit the cover from the front of the booster seat by inserting it into its housing (fig_a); insert the two hooks of the seat in the appropriate holes near the rear of the booster seat (fig_b).
-
Página 29: Transport
Cleaning and maintenance 5. Hook the two side slots to the buttons on the sides. Transport Viaggio Shuttle 120 is easily carried using a handy transport handle. -
Página 30: Serial Numbers
Serial numbers underside, Viaggio Shuttle contains information about its product name, production date serial number. Replacement Parts 1) BSAVSHUS* 2) MUCI0161N 3) MMSP0089 4) SPST10036NF NOTE: Spare parts available in different colors* to be specified when ordering. - Página 31 VIAGGIO SHUTTLE 120 VIAGGIO SHUTTLE 120 IMVS00US35 IMVS00US35 Peg-Perego S.p.A. declares under Peg-Perego S.p.A. declara bajo su its sole responsibility that the propria responsabilidad que el article to which this declaration artículo considerado ha sido relates has undergone internal sometido a ensayos propios y ha...