Installing The Booster Seat In The Vehicle - Peg-Perego Viaggio SHUTTLE 120 Instrucciones De Uso

Installing the booster seat in the vehicle

5. To release Viaggio
Shuttle 120 from the
vehicle seat, pull the
handle (1) and the seat
until the release buttons
2
on the side of the base are
fully revealed. In so doing,
click
the yellow release buttons
will be visible on the sides
of the base; pull the two
1
buttons (2) until you hear
the attachments click
open. At this point you can
remove the car seat.
6.
To reposition the
1
connectors inside the base
(when not in use), pull the
lever once more (1) and
simultaneously push one
of the two connectors in (2)
until they disappear.
2
19