Time And Basic Settings; Second Time Zone; Alarm; Snooze Feature - Crivit 1-LD4206 Indicaciones Sobre Su Utilización Y Su Seguridad

Time and basic settings

Press MODE to select the feature before proceeding.
TIME TIME TIME TIME ZEIT ZEIT ZEIT ZEIT
The subfeatures of the time mode can be accessed by pressing SEL.

Alarm

ALARM ALARM
Timer
TIMER TIMER
Time
TIME ZEIT
Press and hold SET for 3 seconds to access setting mode.
The display will show
HOLD HALTEN=
TO SET EINST.
and the 12 or 24 hour selection will blink on the display.
Press SEL to select a setting and confirm your setting by pressing SET. Set the
seconds, minutes, hours, year, month and day in the same way. Now follow the
instructions in "Setup of the heart rate monitor" to adjust the basic settings.
Exit setting mode by pressing MODE.

Second time zone

Press and hold SEL for 3 seconds. The watch will switch to the second time zone
display and T2 will appear on the display. The second time zone can be set as
described in "Setup of the heart rate monitor".
Press and hold SEL for 3 seconds to return to normal time mode.
TEMPS TEMPS TEMPS TEMPS HORA HORA HORA HORA
ALARM ALARMA
COMPTE TIMER
TEMPS HORA
MAINT= MANT=
REGLER AJUST
 - 55 -
Alarm
ALARM ALARM
Press and hold SET for 3 seconds to enter setting mode.
"AL" will appear on the display and the minutes of the alarm time will blink.
Press SEL to set the minutes and press SET to confirm your setting. Set the hours in
the same way.
You may optionally set the month and day as well.
If neither month nor day are set the alarm will sound daily. If the day is set, the
alarm will sound monthly. If both the month and the day are set the alarm will
sound only at the set date.
The hourly chime setting will now appear on the display
CHIME STDALARM
Press SEL to select a setting and confirm your setting by pressing SET
(ON/EIN/ACTIF/ENCENDID=on,
OFF/AUS/INACTIF/APAGADO=off).
If the chime is activated, the bell symbol will appear and the watch will chime at
the beginning of every hour.
Exit setting mode by pressing MODE. The alarm can be activated or deactivated
by pressing SET. If the alarm is activated the alarm symbol
When the alarm sounds, press SET, SEL or MODE to stop the alarm.

Snooze feature

If no button is pressed when the alarm sounds, the alarm will shut off after about
30 seconds and the symbol will blink on the display. The alarm will stop and will
resume after sounding after about 90 seconds. The process will repeat itself 4
times.

Timer (max. 23:59:00)

TIMER TIMER
Press and hold SET for 3 seconds to enter setting mode.
The minutes of the timer time will blink on the display.
ALARM ALARMA
SIGN HOR HORA AL
will appear.
COMPTE TIMER
 - 56 -