AVM FRITZ!Powerline 540E Instalación Y Operación página 5

Starting Operation of the FRITZ!Powerline 540E WLAN Set
1. Insert the FRITZ!Powerline 510E in an outlet and use the LAN cable to connect it with your
Internet router (FRITZ!Box).
2. Insert FRITZ!Powerline 540E in an outlet close to your Internet router (FRITZ!Box) and wait
until Powerline • Security lights up permanently.
3. If your Internet router is a FRITZ!Box, you can transfer the wireless LAN settings of the
FRITZ!Box directly to FRITZ!Powerline 540E: Simply press the WLAN-WPS button on
DSL/TEL FON 1 FON 2 FON S LAN 1 LAN 2 LAN 3 LAN 4
0
Internet
8
Power
FRITZ!Powerline and hold it down for 6 to 10 seconds. Then start WPS on the FRITZ!Box
(press and hold WPS or WLAN until the WLAN LED fl ashes).
4. Insert FRITZ!Powerline 540E into a socket at the location where you need access to the In-
ternet and the home network for your smartphone, tablet and other network devices. For
instructions on how to connecxt your devices with FRITZ!Powerline 540E, go to page 10.
WLAN
Network devices
9