Lister STAR Manual De Instrucciones página 6

MAINTENANCE (Figs. 2 & 3)
It is particularly important to keep plug and cable clean and in good order at all times. The
motor and drive gears can be expected to give years of trouble free use if maintained and
serviced regularly. The following should be carried out at the end of each season, or more
regularly if used extensively.
GEARS (Fig. 2)
Every 200 hours running remove the clipper head (1). Wipe the clipper head and gear-
wheel (2) to remove hair and used grease. Coat the gearwheel with clean grease (Lister R2
or Shell Alvania R2 or equivalent). When the clipper head is removed, check the gear-
wheel for wear and broken teeth.
FILTERS (Fig. 3)
The motor air filter shown in Fig. 3 should be frequently removed and meticulously
cleaned (brush supplied) to ensure efficient running of the motor. To clear the gauzes, a
high-pressure air-line is ideal – otherwise wash in detergent solution and dry carefully. If
this maintenance is ignored, overheating of the motor could occur with possible irrevers-
ible damage to the motor, or inefficient clipping at the very least. DO NOT RUN MOTOR
WITH FILTER REMOVED.
WARNING: All maintenance should be carried out with the unit switched off and re-
moved from the mains supply.
RESET BUTTON (Fig. 3)
The clipper is fitted with an overload protection switch, which will trip if the clipper is
overloaded. Should this occur, the unit should be thoroughly checked before fully depress-
ing the button to reset. The button is situated at the backend of the motor body (B).
PARTS LIST (Fig. 4)
When ordering spare parts please specify:
Part number, description and quantity of spare part(s).
Whenever possible, quote the Model and Clipper Serial Number which will be found on
the specification plate.
U.K. USERS ONLY
WARRANTY, REPAIR & REGRIND
Items requiring attention under warranty, repair or regrind should be returned to your
dealer or the Lister factory.
A qualified repairer using genuine Lister parts must carry out repairs.
Do not dispose of this product in household waste. At the end of its useful life please
return this product for recycling to:
LISTER SHEARING EQUIPMENT LTD. DURSLEY, GLOS. GL11 4HR. ENGLAND
4