Braun WelchAllyn PRO 4000 Manual De Instrucciones página 42

How to use Braun ThermoScan
English
1.
To help to ensure accurate readings, make sure
the probe tip and lens are clean and a new, clean
probe cover is in place before each measurement.
2.
When the probe cover is in place, the thermometer
turns on automatically. Wait for the ready signal
beep.
➘
3.
Fit the probe snuggly into the ear canal, then push
and release the Start button.
4.
If the probe has been fitted correctly into the ear
canal during the complete measuring process,
a long beep will signal the end of the measuring
process. You can be assured to have taken an
accurate temperature reading. The thermometer
detects that an accurate temperature measure-
ment has been taken.
If you take the temperature of another person, the
«ExacTemp» light can be of help. It flashes during
the measuring process as long as the probe is
correctly positioned, and lights up continuously
when the thermometer detects that an accurate
reading has been taken.