Safety Regulations - Milwaukee KS 26 Instrucciones De Uso

Ocultar thumbs

página de 51

/ 51
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

WARNING

CAUTION

Technical Data

ENGLISH

These instructions contain important sections dealing with safety.

Special attention must be paid to all framed safety text that begins with a symbol

(triangle) followed by a signal word, as shown below.

WARNING

CAUTION

Also observe the following general safety rules:

J Please pay attention to the safety instructions in the attached leaflet!

J Before starting the machine, read through these instructions carefully.

J For reasons of product safety, the machine must not be modified.

J Use approved personal protective equipment.

J Use Milwaukee Genuine Parts only.

J Always replace worn or damaged labels.

READ ALL THE FOLLOWING INSTRUCTIONS

General

The requirements of the Personal Protective Equipment at Work Regs 1992 are

mandatory to United Kingdom (UK) users. Similar legal requirements exist in other

countries. They should be complied with at all times.

When using electric tools, basic safety precautions must be observed, to

minimise the risk of fire, electric shock and physical injury.

Always disconnect the plug from the socket before carrying out any work on the

machine.

Before use check machine, cable, and plug for any damages or material fatigue.

Repairs should only be carried out by authorised Service Agents.

Keep mains lead clear from working range of the machine. Always lead the cable

away behind you.

Only plug-in when machine is switched off.

Using the Saw

Work within the machine's capacity. Do not use it for purposes other than those for

which it was designed.

Beware of concealed electric cables. If the tool strikes a power cable the metal

parts of the saw could become 'live'. Always use the insulated handles to prevent

electric shock.

Using excessive force will reduce efficiency and tire the operator. The saw is

designed to operate safely and efficiently without the use of excessive force.

Dust that arises when working on material containing asbestos or stonework

containing crystalline silicic acid is harmful to the health. Please follow accident

prevention regulations.

Mind safety regulations issued by your employer's liability insurance association.

Do not use grinder on any material containing asbestos.

Always wear goggles when using the machine. It is recommended to wear gloves,

sturdy non slipping shoes and apron.

Ensure a safe support when sawing.

Protect your head from injury from falling brickwork. Always wear a protective

helmet.

Maintaining the Saw

The saw is protective insulated.

Keep the handles secure, dry and free from oil and grease.

Ensure that the anti–vibration systems are maintained in good working order.

Follow the recommended procedures for lubrication, and change of blades.

To ensure safe and proper operation, examine the saw for obvious damage before

use. Damaged parts should be repaired or replaced immediately by an approved

service organisation using Milwaukee approved spares and materials.

SAVE THE INSTRUCTIONS.

Nominal power

. . . . . . . . . . . . . . . .

Cuts per minute

Cutting depth

. . . . . . . . . . . . . . . . . .

Lenght without blades

Weight with blades