Garment Plus - Samsung WA52M7750A Serie Manual Del Usuario

NOTE
Adding laundry when Child Lock is on
To add laundry, deactivate the Child Lock
function. To deactivate the Child Lock
function, press and hold Spin and Soil Level
simultaneously for at least 3 seconds. See
the "Pause Option" section on page 38 for
additional details.
Deactivating the Child Lock function
Press and hold both Spin and Soil Level
simultaneously for approximately 3 seconds.
• When you deactivate the Child Lock
function, the
turned off.
• The Child Lock function prevents
children or the infirm from accidently
operating the washer and injuring
themselves.
WARNING
If a child enters the washer, the child may
become trapped and suffocate.
CAUTION
• Once you have activated the Child Lock
function, it continues working even if
the power is turned off.
• Forcing the lid open can result in injury
or damage to the product.
NOTE
To add laundry after you have activated
the Child Lock function, you must first
deactivate the Child Lock function.
Sound
The Sound Off function can be selected
during all cycles.
WA7700M_DC68-03774D-04_EN.indd 35
Child Lock indicator is

Garment Plus

You can add or take out laundry items even
after the wash has started, as long as the
Garment Plus indicator is on. Pressing
Start/Pause unlocks the lid. If you open the
lid and want to continue the wash cycle,
close the lid, and then press Start/Pause.
NOTE
If you have activated the Child Lock, you
must deactivate it first. See page 34.
My Cycle
Lets you save a custom wash cycle
(temperature, spin, soil level, etc.) and
then recall and use it with one button
convenience.
To save a cycle and selected options as your
My Cycle, follow these steps:
1. Press Power.
2. Select a cycle using the Cycle Selector.
3. After cycle selection, set each option.
NOTE
See the "Cycle chart" section on page 63 for
available option settings with each cycle.
4. You can then store the selected cycle
and options by pressing and holding
My Cycle for longer than 3 seconds.
The cycle and options you select will be
displayed the next time you choose the
My Cycle function.
5. Press My Cycle to load and use the
saved My Cycle options. The "My Cycle"
light will indicate activation. Also, the
chosen cycle and option lights will
flicker.
English 35
2019-02-14 6:24:11