Selecting The Signal Input - Sirona SIVISION digital Instrucciones De Uso

4 Operation

4.2 Selecting the signal input

4.2
Selecting the signal input
10
Operating Instructions SIVISION digital, SIVISION 3, 19" flat-screen monitor
To select the signal input menu, press the
key (possible only if no OSD menu was
active previously).
Press
call up the desired signal source.
AUTO
The screen switches over automatically to the applied
signal source. The signal inputs are scanned in the
following order: AUTO, S-VIDEO-PORT and
ANALOG PORT.
S-VIDEO-PORT
Signal from the video camera (video mode)
ANALOG PORT
Signal from the PC (PC mode)
To save the setting, press the
The setting will be saved even after switching off the PC.
Sirona Dental Systems GmbH
or as often as necessary to
key.
60 49 428 D3322
D3322.201.09.02.02