Operating And Display Elements - Sirona SIVISION digital Instrucciones De Uso

3 Operating and display elements

3
Operating and display elements
No. Icon Control
Menu/Select
Menu/Select
Plus
Minus
ON/OFF switch
Ready indicator
8
Operating Instructions SIVISION digital, SIVISION 3, 19" flat-screen monitor
Function
For displaying the OSD menus
This key must also be used for selecting ("up") the OSD control options on the
screen.
For displaying the OSD menus
This key must also be used for selecting ("down") the OSD control options on the
screen.
Press this key to increase the value of the selected OSD control options.
• Press this key to decrease the value of the selected OSD control options.
• Key is used for selecting the signal input menu (video or PC mode). This function is
available only as long as no further menu is displayed.
For switching the LCD screen on and off
This LED indicates the statuses of the different operating modes of the monitor.
• green: an input signal is present at the selected signal source
• yellow:
for AUTO signal input selection: no input signal is present at any input
for a permanently set signal source: no input signal is present at the set input
• off: the monitor is switched off or no voltage is applied
CAUTION
The unused male and female connectors on the back of
the LCD monitor must not be touched in order to prevent
possible damage due to electrostatic discharge.
Do not assign unused male or female connectors to
other devices unless authorized to do so by the
manufacturer, and use only accessories from the
respective manufacturer for this purpose.
i
NOTE
The monitor has two integrated loudspeakers.
The loudspeakers are adjusted via the connected PC.
Sirona Dental Systems GmbH
60 49 428 D3322
D3322.201.09.02.02