Repair Service - Krups KH442 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15

REPAIR SERVICE

PROBLEM
The toaster does not work. Ensure the plug is properly connected to the socket.
The bread is stuck in the
appliance.
The bread is too brown or
not brown enough.
The bread pops out
almost immediately and is
not toasted.
Smoke is coming out of
the toaster.
The cord is damaged.
DISPOSAL
The packaging comprises exclusively environmentally-friendly materials which should be
disposed of according to the local recycling arrangements.
Disposal methods for the appliance itself can be found by enquiry at the appropriate
department of the local authority in your area.
Environment protection first !
Your appliance contains a lot of recoverable or recyclable material.
When disposing of it, take it to a local civic waste collection point.
1
SOLUTION
If the toaster is still not working, take it to an approved KRUPS service
centre.
Unplug the appliance and leave it to cool. Remove the bread carefully.
Be careful not to damage the heating elements when removing the
bread. Never use a metallic object to remove the bread.
Check the setting level selected. Select a lower level if your bread is too
brown, or a higher level if it is not brown enough.
Ensure the freezing or reheating buttons have not been selected.
Ensure the handle has been lowered to the bottom. Also check that the
reheating button was not selected.
If the bread still does not stay in the toaster, bring your appliance to an
approved KRUPS service centre.
It is possible that the toasting level selected is too high. Press the STOP
button to stop the toasting cycle and unplug the appliance.
If the cord on the appliance is damaged, it must be replaced in an
approved KRUPS service centre.

Publicidad

Tabla de contenido
loading

Tabla de contenido