ION iCUE Inicio Rápido página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

THE HARDWARE CONTROLS
DECK CONTROLS
1.
PLAY / STUTTER –
Pressing
PLAY
playback
on
corresponding deck.
you press PLAY while
the
song
is
already
playing, it will restart the
music
from
the
position
where
pressed PLAY, creating
a "stutter" effect.
2.
PAUSE
Pressing
PAUSE will pause the
music at the current
location.
3.
CUE
-
Returns
pauses the music at the
default
Cue
(beginning of the track
by default). To set a
CUE Point, pause the
song,
seek
to
desired position with the
jog
wheel,
and
press
CUE.
you're on the Cue Point,
pressing
and
holding
down CUE allows for temporary play of this point.
The track will play for as long as the button is
held down and will return to the Cue Point once it
has been released.
4.
JOG WHEEL - Each virtual deck features a JOG
WHEEL, which can be used for scratching, pitch
bending and changing playback and cue position
on the corresponding deck. The functionality of
the two jog wheels is determined by the
SCRATCH button.
5.
SCRATCH – If the SCRATCH button is engaged,
both jog wheels can be used for scratching the
music on the decks, much like a conventional DJ
scratches a record. If the SCRATCH button is
disengaged and the decks are playing, both jog
wheels will act as a pitch bend, temporarily
speeding up or slowing down the music.
6.
PITCH - Each virtual deck features a PITCH
SLIDER, which can be used to change the pitch
or
tempo
of
the
corresponding deck.
7.
SYNC - When you press SYNC, CUE LE will
sync the tempo of the deck to the opposite
deck's tempo. If you press SYNC while the song
is paused, only the pitch will be adjusted. If you
press SYNC while the song is playing, the beats
will be aligned too.
8.
PFL – While pressed down, this button will send
the
corresponding
Headphone channel for cueing. Please note that
PFL will only work when Headphones is selected
under the Config -> Outputs tab.
starts
the
If
last
you
and
Point
the
then
Once
music
playing
on
deck's
music
to
MIXER CONTROLS
9.
VOLUME – Each virtual deck features a
VOLUME fader which can be used to make
adjustments to the volume of the music playing
on the deck.
10.
GAIN – Adjusts the gain of the audio signal
playing on the deck.
11.
TREBLE – Adjusts the high (treble) frequencies
of the music playing on the deck.
12.
MID – Adjusts the mid frequencies of the music
playing on the deck.
13.
BASS – Adjusts the low (bass) frequencies of
the music playing on the deck.
14.
MASTER – Adjusts the overall volume of the
mix.
15.
CROSSFADER
CROSSFADER to fade between the tracks
playing on the virtual decks. If the crossfader is
the
in the left-most position, you will only hear the
audio from Deck 1. If the crossfader is in the
middle position, you will be able to hear both the
audio from Deck 1 and the audio from Deck 2. If
the crossfader is in the right-most position, you
will only be able to hear the audio from Deck 2
the
6
You
can
use
the

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido