auna Areal Bar 355 Manual Del Usuario página 31

• Then plug one end of a second HDMI cable (not supplied) to the HDMI
ARC of the TV and the other end into the soundbar's HDMI ARC.
• Repeatedly press the SOURCE on the unit or HDMI on RC to select the
input source to HDMI.
• Start playing on your device. The sound of your device is broadcast on
speakers of the sound bar and the image appears on the TV screen.
Digital Inputs Connection
Connecting DVD player/T V outputs to digital inputs from the sound board.
• Remove the protective cap of the OPTICAL socket. Use the optical cable
(not supplied) to connect the OPTICAL output socket from the DVD
player/T V with the input socket from the sound board.
• Use the COAXIAL cable (not supplied) to connect the COAXIAL output
socket from the DVD player/TV with the input socket from the sound
board.
Note: If there is no sound coming out of the sound board and the
indicator lights up make sure that the audio setting of your source
player(e.g.DVD player, game player, TV ) is set to PCM with COAXIAL
input. If there is no sound output and the OPTICAL indicator lights up,
ensure that the audio setting of the input source(e.g.TV,game console,
DVD player, TV ) is set to PCM with OPTICAL input.
EN
31