Bt Functions - auna Areal Bar 355 Manual Del Usuario

EN
34
AUX IN/COAXIAL/OPTICAL OPERATION
1. Press the Power button repeatedly on the unit or alternatively press the
AUX/COAX/OPTI buttons on the remote control to select your desired
source.
2. Operate your audio device directly for playback features.
3. Press the VOL +/– button to adjust the volume to your desired level.

BT FUNCTIONS

You can listen to tracks from a media device if it is connected to the unit via
BT. You need to pair your BT device with this unit before you connect them
for the first time.
General Notes
• The operational range between this unit and a BT device is
approximately 8 metres (without any object between the BT device and
the unit).
• Before you connect a BT device to this unit, ensure that you know the
device's capabilities.
• Any obstacle between this unit and the BT device can reduce the
operational range.
• If the signal strength is weak, your BT device may disconnect, but it will
re -enter automatically into pairing mode.
Pairing
1. During ON mode, press the BT button on the remote control to select
the BT mode. If the unit is not paired to any BT device, the system enters
automatically into pairing mode; or you need to press and hold the BT
button to start pairing.
2. Activate the BT function on your device and select the search mode.
"Areal Bar 355" will appear on your BT device.
3. Select "Areal Bar 355" in the pairing list. If pairing was successful, this is
shown in the display.