Lincoln PowerLuber 1880 Guía De Instalación Y Mantenimiento página 6

1880 Grease gun
Display
Control
Button
Battery
5852 or 251-10124-7
coupler
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
Fig. 1
Hose
LED light
Bulk
valve
Vent valve
Support
Hose holder
6
Inspection
Visually inspect for damaged, loose or miss-
ing parts. If equipment is worn or damaged,
remove from service. Contact an authorized
service center for damage assessment or
repair.
Operation
Speed selection
Pressing button 2 switches the tool be-
tween high and low pump speed. The letter
"L" or "H" will be displayed on the screen.
High delivers 5.5 ounces (0,162 l) per
minute at 1,000 psi (68 bar) back pressure.
Low delivers 3.5 oz. (0, 103 l) per minute
at 1,000 psi (68 bar) back pressure.
High output is recommended if the tool is
used to lubricate large bearings. Also, high
output is recommended if tool is used to re-
fill small reservoirs.
Low output is recommended if the tool is
used in construction, mining applications
and general lubrication.
LCD display and LED
light
• Button number 1 turns on/off the display
and LED:
• The tool's trigger also turns on the display
and LED:
• The LCD and display will turn off after 30
seconds if not turned off manually.
L
OZ
1 2
Fig. 2