Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. Tighten the blade screws.
9.6
LINE CUT-OFF BLADE
This trimmer is equipped with a line cut-off blade (17) on
the guard. The line cut off blade continuously trims the
line to ensure a consistent and efficient cut diameter.
Advance line whenever you hear the motor running
faster than normal, or when trimming efficiency
diminishes. This will maintain best performance and
keep line long enough to advance properly.
9.7
OPERATION TIPS
WARNING
Keep clearance between the body and the machine.
WARNING
Do not operate the machine without guard in place.
Do these tips when you use the machine
•
Keep a firm hold with the two hands on the machine
while the string head is spinning.
•
Cut tall grass from the top down.
If grass winds around the trimmer head:
•
Remove the battery pack.
•
Remove the grass.
English
17
9.8
CUTTING TIPS
•
Tilt the machine toward the area to be cut. Use the
tip of the cutting line to cut grass.
•
Move the machine from right to left to prevent
thrown debris from hitting the operator.
•
Do not cut in the danger area.
•
Do not force the trimmer head into uncut grass.
•
Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood
can wear the cutting line quickly.
Dangerous
cutting area
10
MAINTENANCE
Read and understand the safety regulations and the
maintenance instructions before you clean, repair or
do the maintenance work on the machine.
9
Direction
of rotation
Best cutting area
IMPORTANT
EN
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
