Operating Controls - Sharp EL-1611E Manual De Manejo

OPERATING CONTROLS

ON
POWER ON KEY / CLEAR / CLEAR ENTRY KEY:
C·CE
Clear - This key also serves as a clear key for the calculation
register and resets an error condition.
Clear entry - When pressed after a number and before a
function, clear the number.
POWER OFF KEY:
OFF
When this key is pressed, the power is turned off.
PRINT KEY:
P
To save paper you can only print what is displayed, even in
non-print mode.
Pressing after the entry of a number will print the entry
P
with the symbol "#" even in non-printing mode.
Pressing will insert a separator into a number entry such
•
as a code, date, etc. Separators are displayed as a period
and dashes but printed as periods.
P/NP
MEMORY + KEY / PRINT ON / OFF KEY:
M +
Pressing selects print mode or non-print mode.
2nd P/NP
Causes the calculator to operate in a display / print or display
2
98305_EL-1611E(LC7)_Eng.pm65
only mode, depending upon the calculator's present state.
"P" on the display: Print mode.
"NP" on the display: Non-print mode.
DEC
MEMORY – KEY / DECIMAL SELECTION KEY:
M –
Pressing
result.
→ F → 3 → 2 → 1 → 0 → A
"F" on the display:
The answer is displayed in the floating decimal system.
"3, 2, 1, 0" on the display:
Presets the number of decimal places in the answer.
"A" on the display (Add mode):
The decimal point in addition and subtraction entries is
automatically positioned to the 2nd digit from the lowest
digit of entry number. Use of the add mode permits addition
and subtraction of numbers without entry of the decimal
point. Use of
the add mode and decimally correct answers will be
printed.
CONVERSION KEY (TO THE EURO CURRENCY) :
2
sets the number of decimal places in the
2nd DEC
×
÷
, and will automatically override
•
0.3.6, 1:24 PM