Using Ac Power - Grundig FIELD RADIO S450DLX El Manual Del Propietario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

S450DLX
OWNER'S MANUAL

USING AC POWER

Plug AC adapter into the socket on the left side of the radio. Use
only the AC adapter supplied. When the AC adapter is plugged in,
the full power level will show in the upper left corner of the display,
looking like a full battery. If you lose the AC adapter that came with
the radio, use one with 9 Volt DC output, negative polarity, 500
milliampere and a plug with 5.5 millimeter outer diameter, 2.1
millimeter inner diameter.
POWERING FROM A CAR OR BOAT
Use a DC to DC converter. Output: 9 Volt DC, negative polarity, outer
diameter 5.5 millimeter; inner diameter 2.1 millimeter.
TURNING ON AND OFF / SETTING AND
DEACTIVATING THE SLEEP TIMER
Turn on the radio by pressing the red POWER & SLEEP button on the
front top right corner of the radio. When it turns on you will briefly
see a sleep timer symbol in the bottom portion of the display, this
is the sleep time and the radio will play for this amount of minutes
and then shut off. It can be deactivated by continuously pressing the
power button until 'on' appears in the bottom of the display; with
each press you will see the numbers going down from 90 to 60 to
45 to 30 to 15 to 10 to 5 to 1 minute and then to 'on'. When 'on'
appears, stop pressing the button. The sleep timer is now disengaged
and you don't have to change it unless you want a sleep time to
appear.
To activate the sleep timer, turn the radio on and press the POWER &
SLEEP button continuously until the desired sleep time appears. The
radio will play for the specified length of time and automatically shut
off. The sleep timer symbol will show in the display, "
".
5

Publicidad

Tabla de contenido
loading

Tabla de contenido