Roger Technology Н70/200AC Manual Del Usuario página 64

14
DISPLAY
Sensing edge
or incorrectly connected.
Sensing edge
or incorrectly connected.
FT1 not connected or in
correctly connected.
FT2 not connected or in
correctly connected.
contact state or not connected.
or incorrectly connected.
or incorrectly connected.
nected or incorrectly connected.
Or LEAF 1 is open.
nected or incorrectly connected.
Or LEAF 1 is closed.
nected or incorrectly connected.
Or LEAF 2 is open.
nected.
Or LEAF 2 is closed.
incorrectly connected.
rectly connected.
N.B.: Press TEST
64
contact is open.
not connected
used or to disable.
not connected
or to disable.
not used or to disable.
not used or to disable.
TEST Mode.
Install a
ST
contact.
Jumper contact
Jumper contact
e Jumper contact FT1
e Jumper contact FT2
PP
AP
PED
-
contacts and con
contacts and con
contacts and con
contacts and con
contacts. Contact