Installation Steps; Package Contents - Axis A1001 Guia De Instalacion

Installation Guide
This Installation Guide provides instructions for installing AXIS A1001 Network Door Controller
on your network. For other aspects of using the product, see the User Manual available at
www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 11.
2. Study the hardware overview. See page 13.
3. Study the specifications. See page 18.
4. Install the hardware. See page 26.
5. Access the product. See page 34.

Package Contents

• AXIS A1001 Network Door Controller
• Cable tie (4x)
• Cover screw
• 6-pin plug connector (5x) (plugged into terminal connectors)
- Reader I/O (blue)
- Reader I/O (red)
- Reader data (white)
- Reader data (yellow)
- Power & Relay (orange)
• 4-pin plug connector (5x) (plugged into terminal connectors)
- Audio (white)
- Auxiliary (yellow)
- Door in (blue)
- Door in (red)
- Power lock (orange)
• 2-pin plug connector (plugged into terminal connector)
- Power (black)
• Printed materials
- Graphical Installation Guide
- Extra serial number label (2x)
- AVHS Authentication key
AXIS A1001 Network Door Controller
11