Changing The Batteries; Cleaning; Resetting Factory Settings - Alpha IP WTHP 61001 Serie Manual Del Usaurio

Resetting factory settings

9 Changing the batteries

The symbol
age. Replacing the batteries:
1. Pull the device from the frame and the mounting plate (see fig. 5 page 4).
2. Remove the batteries from the back of the device (see fig. 6 page 5).
3. Insert two new batteries of the type R03/Micro/AAA according to the marking.
4. Install the interchangeable frame onto the mounting plate.
5. Position the room control unit Display S onto the mounting plate and latch it
into the clips.
9 The display changes to the normal indication.
9 The device is now ready to operate.

10 Cleaning

Clean the device with a soft, clean, dry, and lint-free cloth. The cloth may be mois-
tened with lukewarm water for the removal of heavier contamination. Use a sol-
vent-free cleaning agent for cleaning.
11 Resetting factory settings
All settings will be lost when the factory settings are restored.
Alpha IP Access Point (app)
1. Ensure that the device is active.
2. Delete the device from the app.
56
in the display and in the Alpha IP app indicates low battery volt-