Allegion aptiQ MT20W Guia Del Usuario página 5

MT20W Information
6 Under "Device Information", give the MT20W a user-friendly
name. The name has to be fewer than 25 characters in
length; for example: Property Name Reader. Click "Next".
7 Under "Wi-Fi Configuration", select the encryption your
network requires under the "Security" option. If you only
have a password for your network, it is likely using WPA2.
If you have a username and password, select the WPA2
Enterprise option. For further information, contact the person
who setup your Wi-Fi network.
8
Enter the SSID (the name of the local Wi-Fi network you
wish to connect to) and password for your Wi-Fi network and
click "Finish".
L IMPORTANT: This information must be entered exactly. Any
typos will result in the MT20W not making a successful
connection.
9 The app will transition to the main MT20W configuration
page. Click "Disconnect".
10 The device will attempt to connect to the Wi-Fi network. If
successful, the LED will turn solid blue. Your MT20W is now
successfully added to your site.
aptiQ • MT20W Enrollment Reader User Guide • 5