Allegion aptiQ MT20W Guia Del Usuario página 8

Credential Information
6 Make access changes as needed within the ENGAGE
Technology web application.
7 Place the credential to be programmed with the access
change on the MT20W. Once a valid access change (add,
replace, etc.) occurs, the MT20W will flash green 3 times
accompanied by 3 beeps to indicate the update completion.
The credential is now programmed with up-to-date access
information, and can be removed from your MT20W.
8 The user may now present the credential to the supported
lock to complete the update.
8 • aptiQ • MT20W Enrollment Reader User Guide