Kicker IQ Serie Guia De Inicio Rapido página 11

Turn the FADER ON if you are running
two sets of inputs to the amplifi er. Turn
the FADER OFF if you want to drive all
channels from a single stereo input.
For example, turn the FADER ON if you
are only using AMP 1 as your input
source. Select the input source for the
subwoofer signal, if applicable.
2015 IQ Quick Start Rev C.indd 11 2015 IQ Quick Start Rev C.indd 11
TWEEQ will scan and identify all
connected amplifi ers. KICKER has
support for multi-amp installations
using the IQI accessory. You may also
use a USB hub to connect multiple
amps, however technical support is not
available for this setup.
Choose to bridge the channels if both
channels are used to drive a common
load.
11
12/4/2014 1:29:54 PM 12/4/2014 1:29:54 PM