Kicker IQ Serie Guia De Inicio Rapido página 12

Select the speaker-size for each
channel. This further assists the software
in confi guring your crossover. If you have
a 2 or 4-channel amp and selected to
use a Full-Range signal in the previous
window you will not see this dialog box.
12
2015 IQ Quick Start Rev C.indd 12 2015 IQ Quick Start Rev C.indd 12
Select the type of driver used by each
channel. This will assist the TWEEQ
software in automatically confi guring your
crossover. See Page 13 for reference
chart.
Set the distance of each speaker from
the primary listening position. This will
automatically confi gure the correct
time-delay for each speaker to present
the best sound-stage. The Reference
Speaker setting should be set if there is
a speaker in use that is not connected to
your currently chosen amp, and is also
the farthest from the listening position.
12/4/2014 1:29:54 PM 12/4/2014 1:29:54 PM