Retrofit Receiver Module - Festool CT-F I Manual De Instrucciones Original

6.1

Retrofit receiver module

WARNING
Risk of injury, electric shock
►Always disconnect the mains plug
from the socket before performing
any work on the machine.
►Only authorised electricians are al­
lowed to install the retrofit receiver
module.
►After installation, perform an elec­
trical safety test in compliance with
the applicable regulations.
Assembly [4]
► Remove the hexagon socket
screws from the top and bottom of
the cover plate.
► Take the cover plate off the mo­
bile dust extractor.
► Plug in the retrofit receiver mod­
ule in compliance with the electron­
ics on the mobile dust extractor.
► Tighten the hexagon socket
screws at the top and bottom on the
retrofit receiver module.
LED indicator
The LED indicator [2-2] displays the
Bluetooth ® functionality of the retrofit
receiver module:
Slowly rotating flashing blue
light
English
31